 |
Total Solution for Stamping Job including Peripherals |
| Date International Singapore Private Limited since 1993 |
 |
|
|
|
|
|
| |
| Three-Dimensional Fiber Laser Cutting Machine |
| |
This three-dimensional fiber laser cutting machine is established by
adding a high-accuracy 3D drive axis to
|
|
a ultra-precision fiber laser cutting machine. |
| |
 |
| |
 |
|
 |
| |
|
|
Model SCF5113
|
|
Interference check screen for off-line teaching
|
|
| |
Features
|
| |
| Thanks to single mode fiber laser a minimum cutting width of 60 μm is achieved
(with SFX500 mounted). |
| |
| This fiber laser cutting machine is equipped with a high-speed table
(50 m/min). |
| |
| An all-in-one structure incorporating the fiber laser oscillator and CNC
realizes a space-saving design. |
| |
| 2D cutting is available using plane cutting table.(optional) |
| |
| Off-line teaching system significantly saves setup time.(optional) |
| |
| A non-contact profiling axis (W: optional) is additionally available. |
| |
| |
Specifications
|
| |
| Model |
SCF5113 |
| Laser oscillator |
SFX500 |
SFX1000B |
SFX2000B |
| Rated output |
500 W |
1000 W |
2000 W |
| Cutting range |
800(X) × 500(Y) × 200(Z) mm |
| Rapid feed rate |
50 m/min |
| Number of controlled axes |
5 (X, Y, Z, A, C) + W (optional) |
| Drive method |
AC servo motor (X, Y) |
| Least input increment |
0.001 mm |
| Input power※1 |
3-phase, 200 V, 50/60 Hz, 18.6 kVA |
3-phase, 200 V, 50/60 Hz, 22.6 kVA |
3-phase, 200 V, 50/60 Hz, 30.6 kVA |
| Machine dimensions※2 |
3285 (L) × 1890 (W) × 2600 (H) mm |
| Machine weight |
9000 kg |
|
|
| ※１ Values include the laser oscillator, chiller and other standard
equipment. |
| |
| ※２ Installation space for the chiller unit is separately required. |
| |
| ■Specifications are subject to change due to constant improvements. |
| |
| |
| |
| Gate Type Three-Dimensional Fiber Laser Cutting Machine |
| |
| It is a gate type Three-dimensional fiber laser cutting machine to set
up easily. |
| |
 |
|
 |
| |
|
|
Model SCF5230
|
|
High Tensile Strength Steel t1.2
|
|
| |
| Features |
| |
The cutting head is protected by the escape mechanism to prevent crashes,
eliminating the requirement of
the cutting head normally required after a crash. |
| |
| Horizontal rotation axis(C-axis) of the cutting head moves ±720°. |
| |
| Cutting of aluminum, High Tensile Strength Steel is possible. |
| |
| Off-line teaching system significantly saves setup time.(optional) |
| |
| |
| Specifications |
| |
| Model |
SCF5125 |
SCF5225 |
SCF5230 |
| Laser oscillator |
SFX2000B |
| Rated output |
2000 W |
| Cutting range |
1000(X) x 1700(Y) x 600(Z)mm |
2000(X) x 1700(Y) x 600(Z)mm |
2500(X) x 1700(Y) x 600(Z)mm |
| Rapid feed rate |
24 m/min |
| Number of controlled axes |
6(X,Y,Z,A,C,W) |
| Drive method |
AC servo motor |
| Least input increment |
0.0001mm |
| Input power※1 |
3-phase, 200 V, 50/60 Hz, 38.0 kVA |
3-phase, 200 V, 50/60 Hz, 43.0 kVA |
3-phase, 200 V, 50/60 Hz, 43.0 kVA |
| Machine dimensions※2 |
5630 (L)×4210 (W)×3900 (H) mm |
6610 (L)×4210 (W)×3900 (H) mm |
7620 (L)×3600 (W)×4000 (H) mm |
| Machine weight |
11300 kg |
13000 kg |
13800 kg |
|
| |
| ※１ Values include the laser oscillator, chiller and other standard
equipment. |
| |
| ※２ Installation space for the chiller unit is separately required. |
| |
| ■Specifications are subject to change due to constant improvements. |
| |
|
| |
| We choose brand and machines based on the client's Requirment. |
|
|
 |
|
|
|